Routing: OID-Referenz
34 OIDs der Gruppe Routing mit Name und MIB-Beschreibung, wie sie SNMP Explorer für Mac von Haus aus kennt.
ARP
1.3.6.1.2.1.4.22
ARP/NDP table: IP-to-MAC address mappings for all interfaces
| OID | Name | Beschreibung |
|---|---|---|
| 1 | ipNetToMediaTable | The IPv4 Address Translation table used for mapping from IPv4 addresses to physical addresses. |
Routes
1.3.6.1.2.1.4.24
IP route table: destination, mask, next-hop, metric, type, protocol for each route
Für diesen Teilbaum liefert die MIB des Herstellers die Namen: in SNMP Explorer importieren, dann zeigt der Walk sie an.
OSPF
1.3.6.1.2.1.14
OSPF MIB: router ID, areas, neighbors, LSA database, interface states, SPF runs
| OID | Name | Beschreibung |
|---|---|---|
| 1 | ospfGeneralGroup | The OSPF general group contains the global objects for OSPF protocol management. |
| 1 | ospfAreaTable | Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. |
| 1 | ospfStubAreaTable | The set of metrics that will be advertised by a default Area Border Router into a stub area. |
| 1 | ospfLsdbTable | The OSPF Process's Link State Database. The Database contains the Link State Advertisements from throughout the areas that the device is attached to. |
| 1 | ospfAreaRangeTable | The Address Range Table acts as an AID to the new BBR. It describes those Address Ranges specified on the BBR's interfaces for which routes are to be summarized. |
| 1 | ospfHostTable | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1 | ospfIfTable | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1 | ospfIfMetricTable | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1 | ospfVirtIfTable | Information about this router's virtual interfaces, the non-broadcast networks that link OSPF areas. |
| 1 | ospfNbrTable | A table of non-virtual neighbor information. |
| 1 | ospfVirtNbrTable | This table describes all virtual neighbors. Since Virtual Links are configured in the Virtual Interface Table, this table is read-only. |
| 1 | ospfExtLsdbTable | The OSPF Process's external LSA link state database. |
| 1 | ospfAreaAggregateTable | A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. |
BGP
1.3.6.1.2.1.15
BGP MIB: AS number, peer table (state, prefixes, messages), path attributes
| OID | Name | Beschreibung |
|---|---|---|
| 1 | bgpVersion | Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. |
| 1 | bgpLocalAs | The local autonomous system number. |
| 1 | bgpPeerTable | The BGP Peer Table. This table contains, one entry per BGP peer, information about the connections with each BGP peer. |
| 1 | bgpIdentifier | The BGP Identifier of local system. |
| 1 | bgp4PathAttrTable | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all peers running BGP-4. |
VRRP
1.3.6.1.2.1.68
VRRP MIB: virtual router table, master/backup state, priority, IP addresses
| OID | Name | Beschreibung |
|---|---|---|
| 1 | vrrpNodeVersion | This value identifies the particular version of the VRRP supported by this node. |
| 1 | vrrpNotificationCntl | Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. |
| 1 | vrrpOperTable | Operations table for a VRRP router which consists of a sequence of vrrpOperEntry items. |
| 1 | vrrpOperVrId | This object contains the Virtual Router Identifier (VRID). |
| 1 | vrrpOperVirtualMacAddr | The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps. |
| 1 | vrrpOperState | The current state of the virtual router. This object has three defined values: initialize(1), backup(2), master(3). |
| 1 | vrrpOperAdminState | This object will enable/disable the virtual router function. Updating this object will not affect the existing value of vrrpOperState. |
| 1 | vrrpOperPriority | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of 0 is sent by the master router to indicate that this router has ceased to participate in VRRP. |
| 1 | vrrpOperIpAddrCount | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given ifIndex/VRID pair. |
| 1 | vrrpOperMasterIpAddr | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this Virtual Router. |
| 1 | vrrpOperAdvertisementInterval | The time interval, in seconds, between sending advertisement messages. |
| 1 | vrrpOperPreemptMode | Controls whether a higher priority virtual router will preempt a lower priority master. If 'preempt(2)' is set, the router with the higher priority preempts the master. |
| 1 | vrrpOperVirtualRouterUpTime | This is the value of the sysUpTime object when this virtual router (i.e., the associated vrrpOperState object) transitioned out of 'initialized'. |
| 1 | vrrpOperRowStatus | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1 | vrrpStatistics | Statistical counters and metrics for VRRP routers. |
Probieren Sie es in SNMP Explorer für Mac
Kostenlos im Mac App Store, mit optionalem Pro-Upgrade. Kein Homebrew, kein net-snmp.